REXNORD ZF9307SA Flange Block Bearings

Recommended tightening torque for set screw:5.5 Nm; B1:43.5 mm; A:25.5 mm; Dz:54 mm; d:20 mm; N:12mm; L:60 mm; T min.:-20 °C; Designation of bearing:EX204G2L4; A2:41.5 mm;

C:9.52 mm; Mass:0.14 kg; T:13.5 mm; a:10.5 mm; Nlim (oil):10,000 rpm; B:14.26 mm; Min operating temperature, Tmin:-40 °C; d1:37.5 mm; Rating life coefficient, A2:1.9; Characteristic outer ring frequency, BPF0:7.23 Hz;

Dynamic load, C:37 kN; ra max:1 mm; Min operating temperature, Tmin:-40 °C; Y2:1.32; Nlim (grease):6,600 rpm; C:13 mm; Mass:0.18 kg; ISO 355 reference:T4CC032; Ca min:3 mm; T:17 mm;

C0:20.8 kN; L:120 mm; A:48 mm; J:95.3 mm; H2:107 mm; Weight:1.97 kg; N:M12; H:53.9 mm; T min.:-20 °C; C:31.85 kN;

Recommended tightening torque for set screw:3.5 Nm; C0:4.78 kN; T min.:-40 °C; T max.:100 °C; Weight:0.4 kg; H1:10 mm; G:M6x1; S:6 mm; Designation of bearing:US203G2T04; L1:38 mm;

Aa - Cage-Cone Backface Clearance:0.04 in; T1 - Bearing Width:1.0938 in; Da - Cup Frontface Backing Diameter:3.46 in; Y - ISO Factor9:2.11; D:3.7500 in; C - Cup Width:0.8750 in; K - Factor7:2.05; Cup Part Number:432-B; G1 - Heat Generation Factor (Roller-Raceway)10:42.5; Cage Type:Stamped Steel;

C0:51.8 kN; S:31 mm; Designation of housing:F312-; A2:81.4 mm; B1:79.4 mm; C:81.6 kN; A:56 mm; Weight:6.75 kg; T min.:-40 °C; d:57.15 mm;

sealing TA:SC 605 TA; maximum loads 180°:30 kN; h1:89 mm; fixing bolts G:M12; n1:25 mm; l:77 mm; z:2 mm; l2:144 mm; sealing FS:SC 605 FS; housing weight:2.3 kg;

B - Cone Width:19.583 mm; Series:14000; K - Factor7:1.53; Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.3 mm; C - Cup Width:15.875 mm; Bearing Weight:0.5 Kg; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cup Part Number:14299; G1 - Heat Generation Factor (Roller-Ra

K - Factor2:0.71; Y - ISO Factor4:0.73; D:260 mm; G1 - Heat Generation Factor (Roller-Raceway):303.2; Series:31324X; Design Units:METRIC; Db - Cup Backface Backing Diameter:223 mm; r - Cup Backface To Clear Radius1:3 mm; G2 - Heat Generation Factor (Rib-Roller End):37.8; C - Cup Width:42 mm;

Bearing UPC:013992033017; Dimension H :7-1/2 in; Bolt Size:4 x 1; Cr - Dynamic Load Rating:185430 lbf; Dimension K :4-5/8 in; Cor - Static Load Rating:257168 lbf; Housing Width:8.1 in; Dimension L :26-3/4 in; Bearing Type:Split Cylindrical Ex; Dimension M :7-1/8 in;

C:33 mm; T max.:100 °C; r:2; Recommended tightening torque for set screw:27.1 Nm; B:82.6 mm; G:7/16-20UNF; D:140 mm; C1:10.3 mm; SW:5.56 mm; C0:54.2 kN;

Designation of bearing:UC210-31G2L3; A:54 mm; T max.:100 °C; L1:61 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; H:57.2 mm; S:19 mm; Z:76.1 mm; G:R1/8";

ra max:1 mm; Static load, C0:11.5 kN; Characteristic outer ring frequency, BPF0:5.12 Hz; rs min:1 mm; Brand:SNR; D1:61.4 mm; D:68 mm; da max:46.8 mm; Min operating temperature, Tmin:-20 °C; Dynamic load, C:16.5 kN;

Other Features:Deep Groove | Prelub; Inventory:0.0; Enclosure:2 Metal Shields; rs min:2.1 mm; f0:14.4; Outer Race Width:1.26 Inch | 32 Milli; d:95 mm; D:170 mm; Static load, C0:82 kN; Mass:2.62 kg;